CDR pumps on show during 2008 - News:
CDR buy-backThe Abordi family has repurchased all the shares of CDR Pompe S.p.A, their Milan-based chemical process pump manufacturing company, thus regaining 100% ownership. More details here
Resin and steel magnetic drive pumpsMagnetic drive pumps made from engineering plastics (PP, GF, PVDF or ECTFE), in stainless steel or in special alloys by precision casting. for transferring corrosive, toxic, filthy, radioactive, sterile or flammable liquids.
STN series single-stage magnetic drive centrifugal pumps are the close-coupled type made of engineering plastic (PP - GF or PVDF)
STN series single-stage magnetic drive centrifugal pumps are the close-coupled type made of engineering plastic (PP - GF or ETFE)
The new ETN series of: single-stage magnetic drive centrifugal pumps connects directly to a B5 motor.
UTN-BL are horizontal single-stage magnetic drive centrifugal pumps of the latest generation. Designed for direct connection to a B5 motor, they are extremely compact and silent
UTN-L are heavy-duty horizontal single-stage magnetic drive centrifugal pumps of the latest generation. Their design is fully compliant with standards DIN 24256 and ISO 2858.
ETS is a new type of close-coupled single-stage magnetic drive centrifugal pump. Metal components are produced by precision casting.
UTS-B are single-stage magnetic drive centrifugal pumps. Despite being the close-coupled type, they meet the requirements of standards DIN 24256 and ISO 2858.
UTS are single-stage magnetic drive centrifugal pumps. Of the horizontal type, installed on a common baseplate with the drive, they meet the requirements of standards DIN 24256 and ISO 2858.
Resin and metallic centrifugal pumps with conventional mechanical sealing systemHorizontal centrifugal pumps with conventional mechanical sealing system designed for corrosive liquids, slurry, liquids containing crystals, dirty liquids, effluents and chemical wastewater.
Horizontal centrifugal transfer pumps with conventional mechanical sealing system and fully compliant with standards DIN 24256 and ISO 2858.
Horizontal centrifugal transfer pumps with conventional mechanical sealing system. Designed for direct connection to a B5 motor, they are extremely compact and silent. Inlet and outlet port dimensions meet the requirements of standards DIN 24256 and ISO 2858.
CCN: plastic single-stage horizontal centrifugal pumps with conventional mechanical sealing systemConnected to the driving part by means of a spacer coupling (back pull-out version) and installed on a common baseplate, their design is fully compliant with standards DIN 24256 and ISO 2858.
Metallic horizontal centrifugal transfer pumps with conventional mechanical sealing system. Connected to the driving part by means of a spacer coupling (back pull-out version) and installed on a common baseplate, their design is fully compliant with standards DIN 24256 and ISO 2858.
Metallic horizontal centrifugal transfer pumps with conventional mechanical sealing system. Closed, open or open vortex impeller with reduced overhang and tapered stuffing box with abrasion-resistant flow-regulating baffles.Resin and metal self-priming magnetic drive pumpsSelf-priming magnetic-drive transfer pumps made from anticorrosion plastic material or of AISI 316L steel for acids, bases and solvents. Motor sizes range from 1.5 to 7.5 kW at 2900 RPM. Priming chamber: PVC, PP, PVDF, stainless steel or special alloys. Suction and discharge ports DN 32 x DN 32 or DN 50 x DN 50.
STN-A: Plastic self-priming magnetic-drive transfer pumps built from corrosion-resistant plastic. Priming chamber: PP, PVDF or PVC.
ETN-A: self-priming magnetic-drive pumps built from corrosion-resistant plastic. Priming chamber: PP, PVDF or PVC.
ETS-A: : AISI 316L steel self-priming magnetic-drive pumps. Priming chamber: AISI 316L steel.Resin vertical centrifugal pumpsVertical-shaft centrifugal pumps built from PP or PVDF thermoplastic material. These pumps are available in the standard versions with lip-seal system or liquid seal to prevent the outflow of rising vapours and gases.
CVN: vertical-shaft centrifugal pumps .These pumps are available in the standard versions with lip-seal system or liquid seal to prevent the outflow of rising vapours and gases.
CVN-LD: vertical-shaft centrifugal pumps built from PP or PVDF thermoplastic material. Completely disassemblable.Resin and metal magnetic drive regenerative pumpsClose-coupled single-stage magnetic drive regenerative pumps. In the plastic version, the pump casing is made from one-piece machined thermoplastic and in the metallic version, the components are produced by precision casting.
HTN: plastic single-stage magnetic drive regenerative pumps for high-density liquids. The silicon carbide version can handle particularly aggressive liquids.
HTS: metallic single-stage magnetic-drive regenerative pumps offering possibility of pumping liquids containing up to 20% gas.Wattmetric relaysRelays for measuring and displaying active power
E 492 wattmetric relay: multirange, 2 thresholds with direct insertion up to 7A.
W09 wattmetric relay with RS 485 connection to monitoring PCCurrent transformer
Amperometric detector
Resistance thermometer
E 347: low voltage current transformer without primary
TR6 resistance thermometer for industrial applications
A303 phase detectors: Based on amperometric detection, this device is not affected by motor-generated back Emf voltage nor by the network's supply frequency.Headoffice:
CDR Pompe SpA
Via Togliatti, 26/a
20030 Senago (MI) Italy
VAT code 07628510153
CDR Pompe Rome Office:
Via San Quiriaco 1/B
00122 Rome
Tel. and fax 06 56323052
CDR Pompe Vicenza Office:
Contrà S.S. Apostoli, 26
36100 Vicenza
Tel. and fax. +39 0444 526180
Mobile +39 340 4574537
®2006-2008 Vernondata for CDR Pompe
All rights reserved
